Force10 Networks Force10 Manuel d'utilisateur télécharger pdf (Page 58)

58 RPM Ports and Cables

• No flow control (console port only)

• Hardware flow control (RTS/CTS) (for auxiliary port only)

Cable and Adapter Pin Assignments

Use the E1200i Console port on the RPM to connect to a terminal port, PC serial port, or a terminal server

to configure and monitor your system. Use the E1200i Auxiliary port on the RPM to connect to a modem.

Both the Console and Auxiliary port are RJ-45 ports. Figure 25 displays the pinouts in an RJ-45 port.

Figure 25 Pinout for an RJ-45 Connector End Adaptors

Table 8 displays the RJ-45 console port pin assignments. Table 9 displays the RJ-45 auxiliary port pin

assignments.

Table 8 Console Port (RJ-45) Pin Assignments

Pin Signal Input/Output

1 NC (unused) -

2 DTR Output

3 TxD Output

4GND -

5GND -

6 RxD Input

7 DSR Input

8 NC (unused) -

Table 9 Auxiliary Port (RJ-45) Pin Assignments

Pin Signal Input/Output

1 RTS Output

2 DTR Output

3 TxD Output

4GND -

5GND -

6 RxD Input

87654321

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 104 105

Commentaires sur ces manuels

Pas de commentaire